Suspension lamp torsion testing machine GDN-1
It meets the requirements of Test B standard in GB7000.1-2002/IEC60598-1:19994.14.1, and is an ideal testing equipment for professional testing institutions and quality inspection departments of production enterprises. The main function of the device is to have a sufficient safety factor for the mechanical suspension of the steel suspension luminaire.
Introduction:
It meets the requirements of Test B standard in GB7000.1-2002/IEC60598-1:19994.14.1, and is an ideal testing equipment for professional testing institutions and quality inspection departments of production enterprises.
The main function of the device is to have a sufficient safety factor for the mechanical suspension of the steel suspension luminaire.
Specifications:
1. The aluminum alloy profile is used as the body frame, which has a generous appearance, simple structure, light weight and firmness.
2. The torque is applied by the stepper motor drive, and the torque is controlled by the torque sensor to ensure the test requirements.
3. Manual adjustment of the beam, ie the height and center position of the lamp, can be adapted to different types of steel suspension lamps.
4. The digital display of the twist angle of the lamp.
5. If the tested lamp is twisted beyond the specified range after being stressed, the machine will automatically alarm and stop the test.
Technical indicators:
Power supply: AC220V, 50Hz
Torque output: 0.5Nm-3Nm.
Angle display: 0-360 degrees.
Time setting: 1min
Previous: Safety test METRISO C