Lamp adjustment device bending tester
The special equipment designed and manufactured according to the requirements of GB7000.1:4.14.3 standard is suitable for the bending test of the adjustable device of the lamp. The equipment is made of aluminum alloy frame, stainless steel sealing plate, driven by Panasonic servo motor, color touch screen display, controlled by Omron PLC. The test period, bending rate, and bending angle can be preset. Provide a complete sample clamping fixture to meet the requirements of a variety of samples.
Product introduction:
The special equipment designed and manufactured according to the requirements of GB7000.1:4.14.3 standard is suitable for the bending test of the adjustable device of the lamp.
The equipment is made of aluminum alloy frame, stainless steel sealing plate, driven by Panasonic servo motor, color touch screen display, controlled by Omron PLC. The test period, bending rate, and bending angle can be preset. Provide a complete sample clamping fixture to meet the requirements of a variety of samples.
Product parameters:
• Test period: 0~10000 times (adjustable)
• Bending rate: 0.1 to 10 times / min
• Swing angle: 0~180 on both sides of the vertical line
• Maximum swing radius of the pendulum: R500mm
• Center height of rotation: 1200mm
Product acessories:
• Panasonic servo motor 1 set
• Color touch screen 1 set
• Omron PLC 1 set
• Fixing fixture 2 sets
Previous: Light string thrust test device
下一条: Thermal protection ballast heating test chamber LGHX-226