Insulation layer test device for bendable current sensor
This tester is designed and manufactured according to the standard requirements of Figure 104 and Figure 105 of IEC61010-032 to verify the bending resistance of the insulation layer of the current sensor. The test machine adopts button control, which can be driven by a variable speed motor, and the counter displays the number of times the insulation of the current sensor is bent. The number of bending tests can be set directly on the counter, which is easy to operate.
one. Description:
This tester is designed and manufactured according to the standard requirements of Figure 104 and Figure 105 of IEC61010-032 to verify the bending resistance of the insulation layer of the current sensor. The test machine adopts button control, which can be driven by a variable speed motor, and the counter displays the number of times the insulation of the current sensor is bent. The number of bending tests can be directly set on the counter, which is characterized by convenient operation and accurate operation.
two. Technical indicators:
Pulley diameter: 30mm
Pulling one end of the current sensor through the motor drive is to make it move back and forth, and the number of movements can be set, and the number of times is automatically stopped.
Counter: 1-9999 times can be set
Hanging weight: 1KG.
Working voltage: AC220V/50Hz.
Previous: Safety test METRISO PRIME+