Shanghai Haiyue Electronic Technology Co., Ltd. was established in 2006. Since its establishment, the company has been focusing on the R&D, production and sales of safety and electromagnetic compatibility test equipment. The company's main personnel have nearly 20 years of experience and rich practical experience. It has successfully provided a number of large-scale certification laboratories with the planning of test equipment and the supply of corresponding test equipment. The company produces hundreds of various types of safety equipment and test instruments, and undertakes non-standard custom test equipment. The pendulum rain test device produced by our company is designed and manufactured according to the requirements of IEC60529-2001 , GB4208-2008 and other standards . This equipment is widely used in lamps and electrical and electronic products certification testing institutions and production enterprise quality control departments for IPX3 and IPX4 products . Waterproof performance testing; the equipment has been widely used in the mechanical and electrical laboratories of the Entry-Exit Inspection and Quarantine Bureau and domestic and foreign product certification laboratories, and the equipment performance has reached the international advanced level.

The complete set of equipment consists of a swing tube device, a water supply platform, a turntable, and an electrical control cabinet.

Product parameters

(1) Pendulum device:

Function parameter:

1. Applicable to IPX3 and IPX4 testing of products .

2 , swing tube specifications: R600mm , the number of openings: 25 (other R200mm , R400mm , R800mm , R1000mm can be purchased), a total of 1 swing tube. The material is stainless steel, the outer diameter of the pendulum tube is 25mm , and the inner diameter is 17mm . Many manufacturers' pendulum tube test is because the pendulum tube is too thin, the pendulum tube is not rigid enough, and the pendulum tube is twisted to cause distortion and cause the swing tube support frame to sway, especially This phenomenon is more obvious after a while. The connecting flanges on both sides of the pendulum tube are fixedly welded by special fixtures to avoid the connection stress on the connecting flanges on both sides, which causes the connection stress of the swing tube support frame. The pendulum nozzle is ¢ 0.4mm , and the spray angle can be adjusted. Because the needle seat is welded to the swing tube, it is impossible to ensure that the nozzle is aligned with the center of the swing tube when spraying, so adjust the needle in actual use. The mouth, so that the sprayed water is aligned with the center of the swing tube.

3 , swing tube drive: driven by Panasonic servo motor.

4 , swing tube speed: stepless speed regulation

5 , swing angle: 0 ° -360 ° adjustable;

6. Swing tube support frame: the support frame is industrial alloy aluminum profile, and the chassis is stainless steel sealing plate;

7 , test time: 0-9999min adjustable.

8 、 Turntable: 1 set, the material is aluminum profile and stainless steel, countertop grid structure, diameter is 800mm , with stainless steel universal caster, retractable height 850-1200mm , turntable speed 1-3r/min , optional reverse rotation Alternate rotation or forward rotation (to avoid the sample charging test, the turntable rotates in one direction and wrap the power cord); the turntable has a sample power supply waterproof box, and is equipped with a 10A universal socket to supply power to the sample, bearing 50kg ;

9. The inlet end of the pendulum tube is connected to the rotary joint without connecting the inlet water pipe directly to the swing tube;

10 , with a pressure gauge, showing water pressure;

11 , the horizontal height of the swing tube: 1300mm higher than the ground

Main configuration:

1 set of R600mm 1 set;

2 Panasonic servo motor and driver 1 set

3 sets of 3 state planetary worm gear reducers

4 drip needle holder copper nickel plating

5 sets of pendulum tube support

6 waterproof electrical box 1 set

7 sets of rotating table

8 sets of rotary joints

(2) Water supply platform:

Function parameter:

1. Flow control: equipped with one flow meter to meet the requirements of different flow rates from IPX3-IPX4

2 , small flow water supply pump: 1 set, meet the flow requirements of IPX3-IPX4 .

3 , rain water pressure: 80-100Kpa ( adjustable )

4 , connecting pipeline: 1 batch, the material is stainless steel, including water pipes, ball valves, butterfly valves and various connectors.

5 , the body material: industrial alloy aluminum profiles.

6. With water filter, this water filter can replace the filter core to filter impurities in the water to prevent the impurities from blocking the dripping and the needle of the swing tube;

8. Install a solenoid valve to control the water supply switch of the swing tube device;

Main configuration:

Flowmeter: Yuyao Silver Ring 1 set

Water pump: Hangzhou South Special 1 set

Solenoid valve: Shanghai Juliang 1 set

(3) Electrical control cabinet:

Function parameter:

Chassis material: stainless steel;

Man-machine interface: Delta 7 -inch color touch screen;

Controller: Omron PLC ;

Control function: swing tube device motion control, rotary table motion control, test time control, solenoid valve motion control. The following is a description of each control function of the touch screen ;

3.1 swing tube device motion control :

3.1.1 setting the swing angle of the swing tube;

3.1.2 Set the on/off time of the sample. Some standards, such as GB 7000.1, require the sample to be tested after the power-on test, so the on-off time of the sample can be set here.

3.1.3 control the rotation and rotation of the turntable;

3.1.4 set the test time;

3.1.5 setting the frequency of the swing of the swing tube;

(7) Other instructions:

1. Filter: a filter with an easy-to-replace filter element in front of the water inlet of the storage tank;

2. Flow and pressure: The corresponding flowmeter required by the standard is installed on the water supply platform, and the corresponding pressure gauge required by the standard is installed on the swing pipe device;

3. Power supply waterproof protection: the power supply and connection, plug and socket are waterproof protection;

4. Lines and pipelines: According to the actual location of the equipment, the routing path of the components of the waterproof equipment can be made without affecting the test and the incoming and outgoing areas. The installed lines and pipelines are installed according to the actual layout requirements of the customer's laboratory;

The company has always adhered to the rigorous attitude, adhering to the "integrity as the cornerstone, providing professional technical services, perfect solutions, high-quality testing equipment" concept, constantly improve after-sales service, improve product quality, and strive to become the industry leader Person .

The company also sells a number of well-known safety equipment manufacturers at home and abroad, including: US COMPWEST , Italian ATS , American ED&D , Taiwan Whale, Japan SOKEN , Japan KIKUSUI , Japan YOGOGAWA , Taiwan Epps, Japan SOKEN , Japan ESPEC and many more.

The company provides complete EMI and EMS equipment in the field of electromagnetic compatibility. The agent supply includes European EM-TEST , Italian AFJ , German FRANKONIA , Swiss EMC - PARTNER , Japan MORITA and many other manufacturers. At the same time, the company is also the sales outlet of Beijing Kehuan in East China. .

It is our goal to improve the customer's test equipment, improve the customer's test level and increase customer satisfaction. We believe that Haiyue Club is your best partner with high quality testing equipment and professional technical services!

The rain test device is IPX3 and IPX4 in the IP protection class . It is suitable for external lighting and signaling devices and automotive lamp housing protection. It can provide realistic simulation of electronic products and their components during transportation and use. Various environments such as water and spray tests. In order to achieve the waterproof performance of various products.

Product Usage

The rain test device is suitable for testing the waterproof performance of automotive lamps, wiper performance, waterproof strips, locomotive instruments and low-voltage electrical enclosure protection.

Control System

Programmable logic controllers to complete time, angle, and sequence control of the entire system.