Electromagnetic interference test equipment preferred [Shanghai Haiyue] EMC- electromagnetic interference test system

Shanghai Haiyue Electronic Technology Co., Ltd. was established in 2006. Since its establishment, the company has been focusing on the development, production and sales of safety and electromagnetic compatibility testing equipment . The company's main personnel have nearly 20 years of experience and rich practical experience. It has successfully provided a number of large-scale certification laboratories with the planning of test equipment and the supply of corresponding test equipment. The company produces hundreds of various types of safety equipment and test instruments, and undertakes non-standard custom test equipment.

3D electromagnetic interference visualization system produced by our company WM9500

The position of XYZ in the space is detected by the infrared sensor , and electromagnetic waves scattered from the object to be detected can be measured.

1. A dedicated "stereo camera" is provided, and the image taken by the camera is confirmed on the PC and the measurement area is determined.

2. Hold the probe and set the infrared marker at the place you want to detect. The three-dimensional grid with a range of one to several tens of centimeters can be arbitrarily divided. With any movement of the probe, the interference map can be displayed on the computer and stored.

It can be seen from the " WM9500" that it is possible to obtain data that is indispensable for analysis of the place where the interference occurs, the direction of emission, and the frequency component.

Features

Not affected by the measurement site and measured objects. Since the infrared recognition coordinates are used, conditions such as the measurement environment and the place are not particularly limited, and are completely unaffected by the brightness of the measurement site and the color of the object to be detected. Thereby interference detection from component parts to complete products can be achieved.

For example, the detection of interference can also be achieved in small and dark places such as the engine compartment and trunk of a car.

The biggest attraction of the WM9500 is that it can easily obtain detailed and multi-faceted inspection data while using the handheld method to effectively utilize measurement maneuverability.

Application field

The system can be widely used in industries such as automobiles, air conditioners, refrigerators, microwave ovens, routers, and servers.

Product parameters

Measuring range : recommended about 0.6m-2m (up to about 5m), viewing angle 56°

Measurement method : Obtain spatial coordinates according to infrared reflection method ( 850 nm)

Lens : High-definition lens with auto focus

Detection position accuracy : ±1mm (recommended distance 2m)

Measuring spacing    : at least 1mm ( can be set arbitrarily in the setting of the control software )

Appearance size : host: W400*109*124(mm)

Controller : W320*280*94.5(mm)

Control Method     : Connect USB2.0 interface for control

Maximum voltage : AC100V-240V

Power : 60VA (MAX) (without spectrum analyzer)

Controller : Use a dedicated computer for control.