Indoor heater test angle

‍ ‍ ‍ ‍ This device is designed and manufactured according to the test requirements of Chapter 11 “Fever” of National Standard GB4706.1-2005 (IEC60335-1:2004), and is also applicable to occasions where test corners are required in other relevant standards. .

This device is mainly used for temperature rise test of various electrical and electronic products to provide temperature rise test in accordance with the environmental conditions required by the standard. According to the actual test sample, the test distance of different temperature measurement points, the number of temperature measurement points, the temperature measurement horn specifications and the external dimensions can be customized.

‍ ‍ Second , equipment specifications: as shown in Figure 1

‍ ‍ ‍ ‍ 1 . Overall size: 1120mm*1120mm*2200mm(W*D*H);

2. Wall thickness: 20 mm;

‍ ‍ 3. Number of walls: seven sides (except for the movable board)

‍ ‍ 4 . Copper size: φ15*1 mm

‍ ‍ 5 . Total number of points: 348

‍ ‍ 6. Each surface point: 64 temperature measurement points on the side 1120mm*1800mm cloth; 64 temperature measurement points on the side 1120mm*1800mm cloth; 220 temperature measurement points on the top surface 1100mm*1100mm*320mm cloth.

‍ ‍ 7 . Thermocouple terminal block: one terminal for each positive and negative pole of each temperature measurement point;

‍ ‍ 8. Thermocouple wire: using Taiwan K-type thermocouple wire;