Pulse tester
The pulse tester HY-1.2×50-12 is an alternative model of the original JC-12. This instrument complies with the national standard GB 4706.1-2005 (IEC 60335-2001) “General requirements for safety of household and similar electrical appliances”. Chapters 14, 19, and 29 are required to detect the ability of components to be subjected to transient overvoltages, as well as electrical clearances and creepage distances of appliances. Features; easy to use, simple to operate, good repeatability, no need to adjust the ball pitch. The main component discharge switch has a service life of more than 300,000 times. Equipped with a digital display pulse peak table,
Introduction: Pulse tester HY-1.2×50-12 is an alternative model of the original JC-12. This instrument complies with the national standard GB 4706.1-2005 (IEC 60335-2001) “General requirements for safety of household and similar electrical appliances”. Chapters 14, 19, and 29 require that the component be tested for transient overvoltage capability, as well as the electrical clearance and creepage distance of the appliance.
Characteristic
The instrument is easy to use, simple to operate, reproducible, and does not require adjustment of the ball pitch. The main component discharge switch has a service life of more than 300,000 times. It is equipped with a digital display pulse peak table, which has high precision and can judge the test result through the digital display meter. The voltage can be arbitrarily adjusted within the range. Note: The company's peak table is the real-time pulse peak voltmeter.
Technical Parameters:
Warm description:
There are two ways to determine whether the test is acceptable (whether the sample is broken down)
1, see the spark
2, look at the peak voltage meter Note: Because the test is often in the daytime light is bright, generally even if the sample breaks down, there is no spark (especially when the test voltage is low). The general instrument is equipped with a (DC) test voltmeter, which only displays the test voltage of the instrument, and cannot display the peak voltage at the time of breakdown of the sample. The discrimination result can only be observed by the naked eye, and the accuracy is poor. The pulse voltage tester of the company is equipped with a pulse peak voltmeter to sample the peak voltage of the instrument in real time. Even if the sample breaks down, it can be correctly displayed. The test result is only required to observe the display value of the instrument, which is more intuitive and clear than the naked eye. .
Partner:
Rhine Technology Watch (Shenzhen) Co., Ltd.
Rhine Technology - Commodity Inspection (Ningbo) Co., Ltd.
Zhejiang Fangyuan Testing Group Co., Ltd.
Tianjin Product Quality Supervision and Testing Technology Research Institute
Chongqing Institute of Metrology and Quality Inspection
Anhui Product Quality Supervision and Inspection Institute
Hunan Provincial Product Quality Supervision and Inspection Institute
Zhongshan Quality Measurement Supervision and Inspection Institute
Ningbo Entry-Exit Inspection and Quarantine Bureau
Zhejiang Yongkang Quality Technology Supervision and Testing Center
Qingdao Quality Inspection Institute
Zhejiang Founder Household Appliance Quality Inspection Co., Ltd.
Jiaxing City Product Quality Supervision and Inspection Institute and other testing institutions
Qingdao Haier,
Guangzhou Yilipu
Ningbo SGS
Shanghai Honeywell
Shenzhen Kaidier Certification Co., Ltd.
Henan Medical Device Inspection Institute
Hunan Medical Device Inspection Institute
Shaanxi Medical Device Inspection Institute, etc.
Previous: Wire and cable fire resistance test device
下一条: Winding coil on-line resistance/temperature dual display detector (new)