Power line Bending test machine
The test instrument is based on GB4706, IEC60335 and other standard requirements for testing lamps, hand power tools, such as the resistance to bending performance. The test machine adopts PLC control, servo motor drive, touch screen display working status. The angle, speed and bending test times of bending test can be set directly on the touch screen, which has the characteristics of convenient operation, accurate running and so on.
The test instrument is based on GB4706, IEC60335 and other standard requirements for testing lamps, hand power tools, such as the resistance to bending performance. The test machine adopts PLC control, servo motor drive, touch screen display working status. The angle, speed and bending test times of bending test can be set directly on the touch screen, which has the characteristics of convenient operation, accurate running and so on.
Parameters:
Bending angle: Left and right 0~180度
Test Station: 1 station
Bending rate: 0-60 times/min. According to the standard iec60335-1 and iec60745-1 requirements, the bending rate is 90 degrees, 60 times/min.
Number of bends: 1-99999 times.
Operating voltage: ac220v/50hz.
Sample power supply: Need to connect the source, the power supply does not exceed the AC 250v/25a, the machine is equipped with voltmeter and ammeter, showing the test sample current and voltage.
BuyScratch TesterLooking for Serene
Previous: High voltage AC load cabinet