Artificial power Network ls16c
LS16C Artificial power network meets the standard CISPR16-1 requirements, is a single-phase, rated current of 16A lisn, suitable for the 230V voltage range of the power supply conduction test. The use of an air core coil design avoids the saturation caused by large currents, and the coarse wire coils ensure a continuous high load current capability, allowing a short time (10 minutes) to allow twice times the large current to pass. EMF Testers Product Features 1. Frequency range 9khz-30mhz, available for dc-63hz power conduction test
LS16C Artificial power network meets the standard CISPR16-1 requirements, is a single-phase, rated current of 16A lisn, suitable for the 230V voltage range of the power supply conduction test.
The use of an air core coil design avoids the saturation caused by large currents, and the coarse wire coils ensure a continuous high load current capability, allowing a short time (10 minutes) to allow twice times the large current to pass. Serene Main Products:EMF Test instrumentPulse Tester
Product Features
1. Frequency range 9khz-30mhz, can be used for dc-63hz power conduction test
2. Complies with CISPR16-1 standards, can be tested according to EN, CISPR, FCC, ETS, Vcci and VDE standards
3. You can manually select the test phase line, or you can automatically switch through the software
4. Built-in galvanometer for switching operation and eut absorption current measurement as required by CISPR 14-1 for intermittent interference measurement with the clicks Sound Analyzer
Technical data
