Steel ball Impact test device

First, overview:

This device is applicable to GB 4943.1-2011/iec 60950.1-2005 "Information technology equipment Security 1th: General requirements" standard 4.2.5 clause requirements; GB 7000.1-2007/iec 60598.1-2003 "lamps Part 1th: General requirements and tests in the standard 4.13.4 clause requirements; GB 8898-2011/iec 60065-2003 "audio, video and similar device safety requirements" in the standard section 15.4.3 clause requirements; UL1598 The requirements of section 16.5.7.2 and article 19.21 of the standard of luminaire standards. The sample is in normal position, the electromagnet holds a smooth solid steel ball with a diameter of 50mm and a mass of about 500g, so that it drops freely from the height of 1.3m to the sample, and then tests the conformity of the sample after testing, and the equipment uses three layers of solid wood flooring to place the sample.

Second, technical parameters:

1. Impact mode: electromagnet suction and release steel ball

2. Drop height: 1.3m max.

3. Altitude indication: Scale

4. Drop support platform: hard plank, with bezel on three sides

5, drop times: 0-999 Times automatic counting