Wire and cable Flex testing machine

Brief introduction:

The test machine according to IEC60245.2, GB5013.2, GB2951.21, JB4278.3 and other standards, rubber and plastic finished wire and cable mechanical strength flexure test related terms required design and manufacture, used for the nominal cross-sectional area of conductors not exceeding 4 mm2 and the number of cores not exceeding 4 (or 18) Rubber plastic wire and cable flex test.

This test function satisfies the test requirement of common standard at home and abroad, and has wide application range. Precision Digital instruments,EMF Test instrumentCan be more accurate measurement of small or large current voltage, pulley replacement is simple and convenient, the use of chain drive mechanism, stable performance, low noise.

Technical parameter:

1, working power: AC 380V 50HZ

2. Load current: 0-25a

3, load voltage: 0-400v

4. Test speed: 330±5mm/s

5. Test itinerary: 1000±20mm

6, Applicable wire core: 2-4 (or 18)

7, the applicable line diameter: 0.2-4 mm2

8, Pulley diameter: 60, 80, 120, 160, 200mm

9. Combination Weight: 0.5-8kg

Main accessories:

3kw Regulator 1 sets

3kw Transformer 1 sets

• Voltage Meter 1 Sets

• Schneider 100A AC CONTACTOR 1 sets

• Timer 1 set