Intelligent digital lamp head torque meter

Introduction:

The intelligent digital lamp head torque meter HY-DNT-1 is used to verify the thread and other fixed joints between different parts of the lamp according to the requirements of Section 4.14.4 of GB 7000.1. Loose. It mainly simulates the eligibility of the lamp holder to be rotated during the replacement of the light source. The instrument has a built-in intelligent microprocessor, and the defibrillation tester is a new generation of smart products.

Features:

1 It can measure the positive and negative torque of the lamp cap, and can set the upper limit alarm, the shutdown data is not lost;

2 The instrument has a zero calibration function, its own zero point is stable, and the 4-digit display has high precision and good stability;

3 The internal double watchdog design of the instrument, the complex environment does not crash, and the reliability is higher;

4 Meet the domestic and international standards for all types of light source lamps.

5 Optional equipped with various types of lamp holders E26/E27, B22D, E14/E12, G13/G5 and other measuring fixtures, easy to test.

parameter:

1 Measurement range: 0-10N.m

2 Measurement accuracy: ≤1%

3 Repeatability: ≤0.5%FS

4 Linear: ≤0.5%FS

5 lag: ≤0.5%FS

6 Overload capability: 120% FS

7 Rated working conditions: Temperature: 25±5°C

Humidity: ≤65%R. H

Power supply: AC 220V ± 10V, 50HZ ± 1HZ

8 Meter size: width * height * length (330mm * 110mm * 335mm)

9 Power consumption: 15VA