Lamp Life Test System

Overview

Lamp Life test system is Shanghai Hai Yue Electronic Technology Co., Ltd. according to GB/T 17263-2002 and GB/T 17262-2002 standard and customer special requirements and design and manufacture of special test equipment. The system is composed of the control system and the sample holder. Each output independent voltage indication, each set of output independent current indication, work status monitoring, working time indication. The user can independently set each test time control (boot time, shutdown time), count control according to the actual demand, can set the work of multiple on-off cycle and time setting of work cycle (such as 21H power, 3H power off, 10 cycles or 1 hours power, 2 hours power off, 100 cycles); equipped with 60 current sensors ，Key Life test instrumentThe life time of each sample in 60 samples can be recorded.

First, equipment specifications

(a) control system:

1. Control of the inspection system:

PLC Controller: Using PLC control, parameter display and setting using 5 inch touch screen

Test cycle setting: 0-100000

Power-On Time setting: 0-999999s (or h)

Blackout time setting: 0-999999s (or h)

2. Voltage and current:

Voltmeter: Digital voltmeter showing the required test voltage

Ammeter: Digital ammeter showing the required test current

Sensor: 60 current sensors to monitor the life time of each sample in 60 samples

Protection device: Overload protector, overcurrent protector, overpressure protection device

(ii) sample holder

1. Multifunctional Combination test Stand

Size (L x W x H): 1600mmx1000mmx1600mm, one

The test stand is 4 layers, each layer is 0.4 meters high, 3 layers with terminal posts, can be connected according to the size of the sample, can be 30 to 60 hair tube, there is a layer with 10 E27 lampholders and 20 E40 lampholders.

The following are the similar systems we have made to other companies: