Child test

Child test

The child test refers to the requirement of the No. 18 probe of Figure 12 in the standard IEC61032 and the No. 19 probe of Figure 13, and the No. 18 probe is used to simulate whether the child who is greater than 36 months and less than 14 years old touches the dangerous part.

Product Details

First, product overview

The child test refers to the requirement of the No. 18 probe of Figure 12 in the standard IEC61032 and the No. 19 probe of Figure 13, and the No. 18 probe is used to simulate whether the child who is greater than 36 months and less than 14 years old touches the dangerous part. The No. 19 probe is used to simulate whether a child who is less than 36 months touches dangerous parts. It is a test of the protective performance of the live parts that are easily accessible to electrical appliances. It is an indispensable experimental instrument for the electrical testing department.

Second, the use method: the drum drop tester probe, gauge and other instruments and the determination of the pass or fail of the test, please refer to the relevant standards.

Third, the main function of the appliance is the external dimensions, so the operator should pay attention to the following requirements when using:

1. The shape of the appliance cannot be damaged during use. (such as scratching, bending, etc.)

2. The metal part of the appliance should be protected against rust to avoid dimensional accuracy after oxidation.

Fourth, the appliance size parameter map and physical map:

Blob.png

Previous: Needle flame tester

下一条: Wedge probe

Inquiry