Lamp Holder Bending Moment tester
This device is made according to GB7000.1 4th 14.2 and IEC60598 standard. Application: Used to detect the bending moment when the semi-luminaire connected with the screw port or socket holder is fully inserted to meet the standard requirements.
Product introduction £ º
This device is made according to GB7000.1 4th 14.2 and IEC60598 standard.
Product Application:
Used to detect whether the bending moment of a semi-luminaire connected to a screw port or socket holder is fully inserted to meet the standard requirements.
Product Parameters:
1, in line with GB7000.1 4th 14.2 chapters and IEC60598 standards;
2, with 1N, 2.5N, 8N combination of weights set;
3, with e14/e27/b15/b22 lampholders 1 sets;
4, beam size: 0-30cm;
5, Torque range: 0.001-2.2nm;
6, the platform with horizontal and vertical horizontal bubble, can be adjusted by adjusting the foundation screw leveling;
7, add the national standard single-phase two-hole, three-hole socket set for plug torque test.
SereneHigh Voltage Insulation TesterMeets standard requirements
Previous: Raw edge sharpness tester
下一条: Stability test bench